192.168.1.1 Linksyssmartwifi.com Linksys Router Login Ip Address
192.168.1.1 Setup Network Settings
This article is all
about network settings process of a wireless router. As we all know a router is
a device which spreads the wireless radio signal so that other wireless-enabled
devices connect to it in order to access the Internet. Before you could access
the Internet, you need to set up the network settings of your wireless router.
So this tutorial will take you through the 192.168.1.1 setup network
settings process. We have put down the basic steps that you need to
follow in order to set up the network settings of the wireless router.
1. BASIC HARDWARE
SETUP
Before we take you to the 192.168.1.1 setup network settings process, these are some of the basic hardware setup instructions which are as follows.
·
Unpack the router and
connect the router to the ISP modem (Internet Service Provider). For the
connection, you will need an Ethernet cable. Plug both ends of the cable into
router and modem.
·
Make sure that both
these devices are turned on and in working condition.
·
Now go to the modem
and check whether the modem has an active Internet connection or not.
2. SETUP NETWORK
SETTINGS
Now we will explain
you the network settings process. In this process, you will need to access
the 192 168 1 1 setup network settings page on your computer.
·
Go to your computer
and launch an Internet browser on it.
·
Enter the 192.168.1.1 setup network settings IP address into the address bar and
press Enter.
·
In a few seconds, the
browser will direct you to the network settings page of the wireless router.
·
Now, manually set up
the Internet connection on your wireless router. For the manual setup, you will
need PPPoE username and password. This information is provided to the user by
the Internet Service Provider.
·
After the Internet
connection setup, configure the basic wireless security settings and make sure
you assign your network a complex security passphrase. This will save your
wireless network from an unauthorized user.
·
Now that you have
configured the network settings of the router, finish the setup wizard and save
the settings on the router.
After you save the
settings, the router will restart in order to reflect the changes. Ensure that
the router is not turned off in between the process. If this happens, you will
face some trouble while configuring the network settings. After the device
restarts, you can connect other wireless devices to your network. Make sure you
remember the network passphrase because you will need it at the time of
connection.
So this was all
about 192.168.1.1 setup network settings process. In case you
face an issue while attempting to set up the network settings, feel free to
call us on our Toll-Free number and we will be more than happy to serve you.
Comments
Post a Comment